Products

Home page

Product classification

$Refractory materials for ironmaking systems$ Refractory materials for ironmaking systems
- $Refractory materials for ladle$ Refractory materials for ladle
- $Unshaped Refractory for Blast Furnace Drawer$ Unshaped Refractory for Blast Furnace Drawer
$Refractory materials for steelmaking systems$ Refractory materials for steelmaking systems
$Refractory materials for industrial kilns$ Refractory materials for industrial kilns
- $Refractory materials for industrial kilns$ Refractory materials for industrial kilns
- $Refractory materials for aluminum melting furnace$ Refractory materials for aluminum melting furnace

Refractory prefabricated parts

Classification:

Refractory materials for aluminum melting furnace

Hotline:

+86-0379-63086878

Inquiry

hiddenValue

Details Introduction

According to the different parts of the aluminum melting furnace, the corresponding refractory materials are selected. The load on the furnace roof is small, requiring good integrity and peeling resistance. The furnace wall that does not contact the aluminum liquid must bear a certain load. Low cement castables with alumina content above 60% are usually used in the furnace roof and furnace walls. The bottom part of the furnace that contacts the aluminum liquid requires that the porosity of the refractory material is low, and it does not wet with the aluminum solution and does not react. The furnace bottom and the molten pool are the key to determine the life of the whole furnace. Using high quality high bauxite, corundum, silicon carbide as the main raw material, control the free quartz and mullite phase in the material, improve the chemical stability of the material, add anti-aluminum liquid wetting agent, improve the anti-aluminum liquid wettability of the material, add ultra-fine powder and water reducing agent, reduce the amount of water, thereby reducing the porosity of the product, improve the density.

The refractory preform is based on the conditions and requirements of the use of the site, the selection of appropriate castable, cast into a suitable shape, and then dried or high temperature firing. The use of prefabricated parts can greatly shorten the construction period of the site, and the quality is easier to guarantee.

Key words:

Refractory prefabricated parts

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!